Turn of the Century
TM
Downrod
Clip
Set Screw
Yoke
Downrod
Pin
5
ASSEMBLY INSTRUCTIONS
2
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
2. Remove the canopy from the mounting bracket by
removing the two mounting bracket screws and from
the round holes in the canopy. Then loosen the other
two mounting bracket screws from the L-shaped slots.
Retain the mounting bracket screws for later. Install the
mounting bracket to the outlet box (not included) using
the screws and washers provided with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
4
Mounting
Bracket Screw
3
3. Remove the downrod pin and downrod clip from the
downrod. Then, loosen but don’t remove the set screws in
the yoke.
4. Feed the wires coming from the yoke through the yoke
cover, canopy and downrod.
Downrod
Canopy
Yoke Cover
Yoke
