CyanoFluor U
ser’s Manual
Rev. A
6
Use caution around solvents, they will degrade the plastic case of the
CyanoFluor.
If a sample is accidentally spilled inside the sample compartment, invert the CyanoFluor
to drain out the excess liquid. Then wipe the inside area dry with a clean soft towel or
tissue followed by a quick wipe using non-abrasive material, such as Kim Wipes.
If extra cleaning is needed, use a mild detergent to dampen a towel for cleaning.
Although the CyanoFluor floats, do not submerge it in water.
Do not expose the CyanoFluor to temperatures outside the specified range of 5 to 40 °C
or damage may occur to the unit that will not be covered under warranty.
