CyanoFluor U
ser’s Manual
Rev. A
7
2 Instrument Operation and Calibration Check
2.1 Button Identification and Function
FTR BLANK
– is used to correct for interference from Dissolved Organic Materials (DOM) in
systems that have a high DOM concentration. See section 2.4 for details.
READ
– is used to measure a sample; procedure detailed in section 2.5.
ON/OFF
– turns the instrument ON or OFF.
ENTER
– allows users to proceed to the next screen/menu.
DATA
– when the DATA button is pressed users can choose between either
sending/clearing data or setting date/time. Use the
keys to choose between the two
options; a marker will indicate the selection made.
If SEND/CLEAR DATA is selected, press ENTER and a submenu will display. Users
can choose, using
keys, to either send data to a connected computer or clear
logged data; a marker will indicate the selection made.
o
If
SEND DATA
is selected and ENTER is pressed, the instrument will send all logged
data out as an ASCII file - see section 2.8.
o
If
CLEAR DATA
is selected, the following message will display;
“ENTER TO
CONFIRM CLEAR DATA
”; when ENTER is pressed all logged data will be deleted.
If SET DATE/TIME is selected, press ENTER and date and time will display on the
screen as (MM/DD/YYYY) and (hh:mm). Use the
keys to select either parameter; a
marker will indicate selection.
o
If
MM/DD/YYYY
is selected, press ENTER and you will be allowed to adjust the
month, date, and year using the
keys. Press ENTER to save the set date.
