Speed Gate Turnstile User Manual
2
）
Cut the power supply, and reboot, see if the master and slave motor can work
normally, if not, replace the main board, if still not work, replace the motor.
7.5. Swing arm is out of sync when opening or closing the door
after swiping the card
Adjust D-10 and D-12, which arm is slower, increase the value
7.6. Swing arm hit
s
the gate frame
1
）
check the swing arm loose or not
2
）
manual reset the left open position, right open position and closing position. 3
）
check if any parts is loose in the motor and drive system, If above all are normal, it
needs to replace the drive.
7.7. When E-1 or E-2 appears in digital tube of main board
SetL-15
，
L-16 value to 1
www.TURNSTILES.us | patrick.mcallister@TURNSTILES.us | 303-670-1099
