Speed Gate Turnstile User Manual
4.2. Operating principle of the system
A).
Turn on the power and the system will enter the working state after 3 seconds.
B).
When the card reader reads an effective card, the peal speaker will make a
pleasant sound to remind the pedestrian that the card is read successfully. At the
same time, it will judge and process the information read from the card and send an
application signal to the main control board.
C).
The main control board receives the signal from the card reader and infrared
sensor, and after comprehensive processing, sends an effective control signal to
the direction indicator and the motor, so that the direction indicator sign turns into a
green arrow pass sign. At the same time, the brake sends a setting voice, the main
control board controls the motor operation, and the gate opens to allow pedestrians
to pass.
D).
after the pedestrian passes through the channel according to the direction
indicator sign, the infrared sensor senses the whole process of the pedestrian
passing through the channel and continuously sends signals to the main control
board until the pedestrian has passed through the channel completely;
E).
If the pedestrian forgets to read the card or reads the invalid card to enter the
channel, the system will forbid the pedestrian to pass, and will issue a voice alarm,
until the pedestrian exits the channel, the alarm will be lifted; Reread valid
chi-square allowed pass.
5. Equipment Installation
Attention:
During installation and construction, relevant circuits should be
disconnected to ensure that all circuits are correct before energizing.
5.1. Equipment installation instructions
www.TURNSTILES.us | patrick.mcallister@TURNSTILES.us | 303-670-1099
