www.Turtle-Beach.com
Page 12
Powering AudioTron
AudioTron has two power switches:
§
Rear panel power switch:
Turns on the main AC power to the unit.
§
Front panel Standby button:
Places AudioTron in a “power-down” state whereby the main
power is still on, but the unit is in a “partial shutdown” mode that retains its temporary settings.
To power-on AudioTron…
1.
Turn on the rear panel AC switch. Wait a few seconds, then press and hold the front panel Standby button
for a few seconds.
2.
If AudioTron is properly connected to the network, it will search the network for PC hosts with song files.
After finding the PC hosts, it scans for songs and catalogs the song names in its internal memory so they
can be quickly accessed.
Once AudioTron is powered on, the rear panel power switch should be left on and the unit should
be turned on and off with the Standby button. Turning AudioTron on and off with the Standby
button avoids the network search process initiated by the “power on” sequence and retains
AudioTron’s temporary settings, so it’s ready to play music
If AudioTron won't power on…
ü
Check that the rear panel power switch is on.
ü
Make sure to press and hold the Standby button for a few seconds.
ü
Check that the power cord is seated properly in the AudioTron’s rear panel receptacle and in
the AC wall outlet.
ü
Check the AC outlet power by installing another known working electrical appliance (like a
lamp) into the same outlet to see if it operates.
ü
Check AudioTron’s fuse (see the section called “
Rear Panel Reference
”)
Ü
If you will not be using AudioTron for an extended period of time, the AC power
switch on the rear panel should be turned off.
“Re-setting” AudioTron
AudioTron may be “reset” by turning the rear panel power switch off and on, waiting a few
seconds, then pressing the Standby button. This would be necessary, for example, if AudioTron is
behaving erratically, or if you wish to re-scan the network because a new PC has been added.
Ü
The network song search initiated by resetting AudioTron can be cancelled by pressing the
“Stop” button.
Songs can then be scanned with the AudioTron “Search for New Music”
feature in the Options menu.
