11
Illumination Settings
To customize the Illumination of your mouse press the Illumination Settings button. This will open the
Illumination Settings Window.
In this window, you can set the illumination of the 3 zones (scroll wheel, Turtle Beach logo, and front grill).
Setting the Illumination Effect
Notice that when you hover your cursor over the logo, scroll wheel, or front of the mouse that that area glows
brightly. Click on one of the 3 zones and then go over to the Effects pull-down menu and select the illumination
effect you want. You can select from:
•
OFF – Turn the illumination off
•
Steady – The illumination stays on all the time
•
Breathing – The illumination goes up and down like it is breathing.
•
Battle – The illumination starts off but then gets brighter and brighter based on how fast you are clicking your
mouse buttons.
Setting the Scroll Wheel Color
The scroll wheel has a full RGB (red – green – blue) LED so you can set it to 16.8 million possible colors.
Hover your cursor over the scroll wheel and then click on it. This will enable the color picker. To set the color,
first select the color using the vertical color bar. Then select the brightness shade of that color in the box to the
left of the color bar.
The boxes on the bottom right tells you the value of the R(red), G(green), and B(blue) components of the LED. It
also tells you the hex value of that color. These may be useful to setf an exact color that you like from some
other application.
After selecting the color and effect, remember to press Apply or OK.
Apply%Changes%
Apply%Changes%
and%Close%
Cancel%Changes%
Current%Color%
Color%Bar%
Color%/%Shade%Picker%
Effects%Selector%
Grill%Illumina>on%
Scroll%Wheel%Illumina>on%
Logo%Illumina>on%
Color%RGB%%
and%Hex%Values%
Previous%Colors%
