APPLYING TUT TRAINER
™
TO DOOR FRAME
STEP 6
1. Secure lower Door Clamp (fig 11) snugly to a
door jamb, wall end or square post; 6 to 9 inches /
15 to 23 cm above floor.
2. Push Spring Lock in and slide the Wall Plate
stem into the hole of the End Cap. Release
Spring Lock and ensure TUT Trainer™ is locked
in place (fig 12).
3. Slide Top End Cap over Wall Plate Stem (fig 13).
4. Tighten Door Clamp firmly, ensuring Door
Clamp is secured strongly on the flat surface of
the door jamb, wall end or square post (fig 14).
fig 14
fig 13
fig 12
spring lock
Please refer to Installation Instructions Video
Top End Cap
Wall Plate Stem
Door Clamp
6 to 9 inches
15 to 23 cm from
Floor
Bottom End Cap
fig 11
