System Administration
TUT Systems, Inc
Page 36 of 104
P/N
220-06288-20
displog
{
on
|
off
}
For example, to enable the display of log messages in current telnet session window,
type:
sms2000%
displog on
For example, to disable the display of log messages in current telnet session window,
type:
sms2000%
displog off
System Administration Tools
Displaying Version Information
To display the release number, reboot count, system images, active system images, and
port information, use the following command:
version
For example, to see version information, type:
sms2000%
version
Exiting the Management Session
Use the
exit
command to exit a management session. If you are using telnet, SMS2000
terminates the connection. If you have made configuration changes during the session,
SMS2000 prompts you to save the unsaved changes, if you do not save them, the changes
are lost. To exit the management session, use this command
exit
For example, to exit the management session, type:
sms2000%
exit
Rebooting the System
In order for saved configuration changes to take effect, you must use the
reboot
command to restart the system.
To force the system to shut down completely and then restart, use this command:
reboot
