Pull out the red lever until you hear a ‘click’ sound.
The red lever should be in the out position.
See next page for each lever
8
9
www.tuttibambini.com
www.tuttibambini.com
Fitting the ISOFix Base
Fitting the ISOFix Base
Press the seat down into the ISOFix base.
This will extend the ISOFix base.
WARNING
To install the ISOFix Child Restraint System, read the instruction
manual carefully, the safety of your child is only guaranteed if the
seat is used correctly. It is therefore important that you take the
time to read these instructions through carefully. Check that the
ISOFix Child Restraint Sytsem has been installed correctly.
1. Fitting the ISOFix base
Press the red button.
The base is installed correcty when the
button is green.
Afterwards pull the black plastic coat of the ISOFix
connectors so they change to green.
