WARNING
To install the ISOFix Child Restraint System, read the instruction
manual carefully, the safety of your child is only guaranteed if the
seat is used correctly. It is therefore important that you take the
time to read these instructions through carefully. Check that the
ISOFix Child Restraint Sytsem has been installed correctly.
1. Fitting the ISOFix child restraint
Place the baby car seat in the correct position
on the ISOFix base. Push the child seat facing
rearward firmly against the backrest of the
car’s seat.
Click the child seat with its 2 metal bars onto the ISO-
Fix base until you hear a ‘click’. It is then fully locked
onto the ISOFix base.
10
11
www.tuttibambini.com
www.tuttibambini.com
ISOFix child restraint system
Fitting the ISOFix base
Put the red plastic protectors into the correct position
on the car which is suitable for the ISOFix so that the
connectors can fit into these protectors.
Place the ISOFix base base on the car seat, make
sure that the ISOFix connectors are aligned with the
red plastic connectors you have just fixed in.
Push the baby car seat towards the backrest of the
seat of the car so that the platform is tight against
the car seat.
Push the ISOFix base towards the fixed point,
make sure that the ISOFix base is locked on to
the fixed point. Also make sure that the ISOFix
connector window is green.
Unlocked
Locked
