ACM 400 S motor control unit
19 / 24
10)
Disposal
The control unit does not contain any materials for which known disposal regulations
exist at the time these instructions were written (November 2005). The control unit
does not contain any built-in energy sources.
11)
Extensions/Add-Ons
[X3]
On the printed circuit board there are three slots for optional extensions/add-ons,
which have already been partly covered in these instructions:
[X3.1] For the "Open", "Closed", "Pulse" and "Partial opening" functions or the
universal-output, a
radio receiver
can be installed in the
"Radio"
slot (see page 13)
[X4]. This is described in greater detail in the installation instructions for the radio
receiver.
[X3.2] At
"Slot A"
the optional available multi-functional card MMZ442-50 can be
inserted with the following functions:
The
MMZ442-50
card works correctly from software version V1.2 for the motor
control unit.
[X3.3] An optional membrane keyboard can be connected to the control unit (see
pages
Fehler! Textmarke nicht definiert.
, 14, 17). For space reasons, its use is not
recommended together with the plug-in card MMZ442-50.
