Code no. 977.25.02.00
Dated 06/2018
- 3 -
1
I n t r o d u c t i o n
This manual describes the installation process for the
tubra
®
-PGS (-C) XL
solar station, as
well as its operating and maintenance procedures.
Read this manual carefully before starting any installation work.
Non-compliance will invalidate all claims under the guarantee and warranty.
This manual is intended for trained specialists with an adequate level of expertise in handling
heating systems, water pipe installations and electrical installations.
The installation and commissioning procedures should only be conducted by qualified, spe-
cialist personnel.
The
tubra
®
-PGS (-C) XL
solar station must only be installed and operated in a dry environ-
ment that is protected from frost.
The unit must be installed vertically with the solar connections facing upwards.
Illustrations are symbolic and may differ from product to product.
Subject to technical changes and errors.
1.1
Intended purpose
The solar stations in the
tubra
®
-PGS (-C) XL
series are intended for the operation of solar
systems with a suitable medium. Any use of a medium other than that specified in the tech-
nical data is not permitted.
Any improper use or modifications to the assembly, structure or components can prevent
safe operation of the system and result in the exclusion of all claims under the warranty and
guarantee.
1.2
Safety instructions
In addition to country-specific guidelines and local directives, the following technical regula-
tions must also be taken into account:
DIN 1988
Technical rules for drinking water installations
DIN 12828
Heating systems in buildings
DIN EN 12897
Water supply
DIN 18380
Heating systems and central water heating systems.
DIN 18382
Electrical cable and wiring systems in buildings
DIN EN 12975,
DIN EN 12976,
DIN EN 12977
Thermal solar systems and components
VDE 0100
Installation of electrical equipment
BGV
Accident prevention regulations of workers' compensation
associations
As the system can reach temperatures > 60°C, there is a risk of scalding and burning
through contact with the components.
1.3
Applicable documents
Also observe the installation and operating instructions for the various components used,
such as the control unit and the solar pump.
1.4
Delivery and transport
Check to make sure the product is complete and undamaged immediately after receipt. Any
damage or complaints must be reported immediately.
Summary of Contents for tubra-PGS XL
