46
v
Event recording has priority in recording. In C/E recording, the recording will
follow conti recording setup in normal condition while it would follow event
recording setup in event generation.
v
For convenience, you can use the ‘Apply All’ menu to change with the same
preference. You don’t have to setup each channel if you using the ‘Apply All’
function.
v
Duration is to set post event recording time.
v
Pre alarm is to set pre event recording time.
v
Total shows total fps of all channels. If total fps is more than supported, it turns
red. If it turns red, you need to set a lower resolution or FPS.
v
Event recording has priority in recording. In C/E recording, the recording will
follow conti recording setup in normal condition while it would follow event
recording setup in event generation.
2) Group
•
With this menu, you can set the group using the scheduler. If you choose ‘Group’
tab, you can see the similar screen with ‘Record’. The setting is similar
CH 3 How to Use
* Timestamp
With ‘Record’ and ‘Group’ menu, you can check the ‘Timestamp’ to mark the time
on your recording files.
Summary of Contents for 960H08
Page 1: ...1 Digital Video Recorder User s Manual EYE ON 960H Realtime 960H08 16 16R 20R 32R ...
Page 4: ...4 CONTENTS Trouble Shooting 82 How to Connect xbox1 83 Contents ...
Page 61: ...61 5 7 Name You can set a name of the alarms CH 3 How to Use ...
Page 84: ...84 3 This is the whole diagram How to Connect xbox 1 ...
