4K LCD Monitor 19
●
DEFAULT
- Used to initialize OSD values to factory
default except for the value of the BACK
LIGHT.
●
USER CONFIG
- Used to save and apply in three kinds of
user configurations.
- Available modes are USER1, USER2 and
USER3.
- All items can be assignable for each USER1,
USER2 and USER3 settings.
●
KEY LED
- Used to control the Key Lamp on the front
of the monitor.
●
SDI OUT
- Used to change the Throughout on the
rear of the monitor to BY PASS or 12G
output.
- In BY PASS mode, the selected channel’s
image is output as it is.
- In 12G signal, output signal is changed to
12G.
●
OSD DISPLAY
- Used to set the OSD MENU DISPLAY time.
- Available modes are CONTINUE, 3 SEC and
20 SEC.
●
SW UPGRADE
- Used to upgrade the firmware using the
USB (Thumb drive).
- Available options are CPU, FPGA.
When CPU or FPGA is selected, only each
program can be upgraded at a time.
●
VERSION
- Displays the current program version of
the product.
- S : Firmware / F : FPGA / H : Hardware.
●
INPUT
- Displays the current input format.
[9] SYSTEM
5. Menu Operations
DEFAULT
USER CONFIG
KEY LED
SDI OUT
OSD DISPLAY
SW UPGRADE
VERSION
INPUT
NO
USER 1
YES
BY PASS
CONTINUE
OFF
S04.F04.H05
NO INPUT
Summary of Contents for LEM-550R
Page 2: ......
