Multi Format LCD Monitor 27
[7] WAVEFORM
5. Menu Operations
PAGE I >> PAGE II
WAVEFORM/VECTOR
WAVEFORM INTENSITY
WAVEFORM TRANS
VECTOR GAIN X 4
LINE WAVEFORM ENABLE
LINE POSITION SELECT
LINE POSITION DRAW
WAVEFORM COLOR
OFF
OFF
OPAQUE
OFF
OFF
0
OFF
WHITE
●
WAVEFORM INTENSITY
- Used to control the brightness of the
WAVEFORM/VECTOR display.
- Available values are between 0 ~ 30. The
higher the number the brighter the
Waveform will be.
●
WAVEFORM TRANS
- Used to control the transparency level of the
WAVEFORM/VECTOR.
- Available modes are OPAQUE and TRANS.
- If the main OSD overlaps with the
WAVEFORM/VECTOR when the option is set
to OPQGUE, it will automatically display it
as transparent and change back to OPAQUE
when the main OSD disappears.
●
VECTOR GAIN X 4
- This item magnifies the precision of
VECTORSCOPE four times size based on the
center of the vectorscope.
●
LINE WAVEFORM ENABLE
- This item is utilized to display the entire data
or one line data on the waveform.
●
LINE POSITION SELECT
- In the WAVEFORM/VECTOR, use the [Up]/
[Down] button to select User’s desired line.
●
LINE POSITION DRAW
- ON/OFF the line indication for line select
feature.
- Activates only when the LINE SELECT ENABLE
feature is enabled.
- When this item is set to OFF, the Line
Waveform still displays if LINE WAVEFORM is
enabled.
●
WAVEFORM COLOR
- This item selects the color of WAVOFORM/
VECTOR.
- Available options are WHITE and GREEN.
<WAVEFORM>
<WA VECTOR>
<VECTOR>
<YCbCr/RGB>
<WIDE-Y>
WAVE
FORM
WAVE
FORM
VEC
TOR
VEC
TOR
Y/R
WAVEFORM
Cb/G Cr/B
Position changes if the value
changes in LINE SELECT option
and the waveform of the selected
position displays.
WAVEFORM/VECTOR : WAVEFORM
LINE POSITION SELECT : ON
LINE POSITION DRAW : ON
WAVE
FORM
LVM-327W
1080/60i
LVM-245W_327W_V2.0_EN.indd 27
2014-04-10 오후 2:01:56
