background image

 Multi Format LCD Monitor   29

[8] AUDIO

5. Menu Operations

 

LEVEL METER SELECT

- Used to control the Embedded Audio Level  

 Meters. 

- Available modes are OFF, G1+G2, G2+G3,   

  G3+G4, G1+G3, G1+G4, G2+G4 and 16CH.

- If Main Menu window activates, the level   

  meter displays semi-transparent even if the  

  [LEVEL METER SIZE] menu is set to NORMAL.  

  It returns to normal when the Main Menu   

  window is deactivated.

 

LEVEL METER DISPLAY

- Used to control display method of Audio    

  Level Meters.

- Available modes are PAIR and GROUP.

 

LEVEL METER REFERENCE

- Used to set Audio Level Meter default.

- Available values are -18dB and -20dB.

- Audio within selected value is displayed in  

  green and exceeded audio level is displayed  

  in yellow.

- Audio exceeding -4dB is displayed in red.

 

LEVEL METER DECAY TIME

- Used to set the reduction time of the  

 

  maximum indication of audio signals.

- Available values are form 0 to 30. Larger    

  values indicate a longer time to display.

 

LEVEL METER  SIZE

- Used to control the size of the Audio Level  

 Meters.

- Available modes are SMALL, SMALL TRANS,  

  NORMAL, NORMAL TRANS, LARGE and    

  LARGE TRANS.

- In SMALL, NORMAL and LARGE modes, the  

  Audio Level Meter appears opaque.

- In SMALL TRANS., NORMAL TRANS and    

  LARGE TRANS modes, the Audio Level Meter  

  appears semitransparent.

LVM-327W

SDI A

LEVEL METER SELECT

LEVEL METER DISPLAY

LEVEL METER REFERENCE

LEVEL METER DECAY TIME

LEVEL METER SIZE

LEVEL METER POSITION

VOLUME

Em. AUDIO RIGHT

Em. AUDIO LEFT

OFF

PAIR

-20dB

O

SMALL

HOR.

MIN

OFF

OFF

 

LEVEL METER  POSITION

- Used to control the position of the Audio   

  Level Meters.

- Available modes are HOR., VER. and BOT..

*16 CH(HOR.): Displays each 8 channel audio  

  level meter horizontally on the top left and  

 right.

*16 CH(VER.) : Displays each 8 channel Audio  

  Level Meter vertically on the center left and  

 right.

*16 CH(BOT.) : Displays each 8 channel Audio  

  Level Meter vertically on the bottom left and  

 right.

 

VOLUME 

- Used to control the embedded audio output  

  volume for the internal speakers of the    

 monitor.

- Available values are between 0 ~ 30.

 

Em. AUDIO  RIGHT

- Used to control embedded audio channel  

  for right audio out internal speaker of the   

 monitor.

- In HDMI mode, HDMI audio output.

- In COMPOSITE, S-VIDEO, COMPONENT,    

  RGB, DVI ANALOG and DVI DIGITAL modes,  

  the audio signal that is connected with the  

  [AUDIO IN] terminal input on the back of the  

  monitor output.

- Available values are OFF and CH 1 ~ CH 16.

 

Em. AUDIO  LEFT

- Used to control embedded audio channel for  

  left audio out of internal speaker and [AUDIO  

  OUT] in the back of the monitor.

- In HDMI mode, HDMI audio output.

- In COMPOSITE, S-VIDEO, COMPONENT,    

  RGB, DVI ANALOG and DVI DIGITAL modes,  

  the audio signal that is connected with the  

  [AUDIO IN] terminal input on the back of the  

  monitor output.

- Available values are OFF, CH 1 ~ CH 16 and  

 Ext.

1080/60i

LVM-245W_327W_V2.0_EN.indd   29

2014-04-10   오후 2:01:56

Summary of Contents for LVM-245W









































Reviews: