TV Logic TDM-243W, Operation Manual

16 Multiformat 3D Monitor   

• HD DISPLAY MODE

  - This item controls the display ratio in HD mode.

  - Available values are 16:9, 1.85:1 and 2.35:1.

• TIME CODE ENABLE

  - This item controls the time code.

  - Available modes are OFF, VITC and LTC.

• ORBITER CIRCUIT

  - Feature prevents image sticking effect on LCD 

    Panels when signal input is used. The user

     may decide number of pixels to move. 

  - The number of pixels should be within range 

     between MIN(0) and MAX(100). Moving speed 

    is 10 minutes per one pixel line.

• CLOSED CAPTION

  - This item selects Closed Caption.

  - Available modes are OFF, 708, 608(LINE21) 

     and 608(ANC).

  * 608 : CEA-608-B, 708 : CEA-708-C standard 

     display only.

• 608 CHANNEL SELECT

  - Selects Closed Caption 608 channel.

  - CC 1 ~ CC 4 supported.

• 708 SERVICE SELECT

  - Selects Closed Caption 708 service.

  - SERVICE 1 ~ SERVICE 6 supported.

• 3D INPUT FORMAT

  - This item sets 3D Input format.

  - Available modes are SINGLE STREAM, DUAL 

     STREAM and 3G-B.

  * DUAL STREAM : Displays 3D feed with SDI or 

    HDMI 2 inputs(Right/Left).

  * SINGLE STREAM :Displays 3D feed with SDI or 

    HDMI 1 input(Right/Left).

  * 3G-B : Displays 3D feed with SDI 1 input 

     (Right/Left)

• S. STREAM CH. 

  - This item used to select input channel applied  

    in SINGLE STREAM.

  - Available modes are (SDI/HDMI) LEFT, (SDI

     /HDMI) RIGHT.   

• S. STREAM FORMAT

  - This item used to set 3D format in SINGLE    

    STREAM.

  - Available modes are SIDE-BY-SIDE, LINE BY   

    LINE, SEQUENTIAL.

  * SIDE-BY-SIDE : Displays 3D feed with SIDE BY  

    SIDE 3D format.

  *LINE-BY-LINE : Displays 3D feed with LINE BY  

    LINE 3D format. 

  *SEQUENTIAL : Displays 3D feed with FIELD   

    SEQUENTIAL or FRAME SEQUENTIAL 3D format. 

• LEFT CH. MIRROR

  - This item reverses image of left input(SDI-L or

     HDMI-L) left and right in 3D mode.

• RIGHT CH. MIRROR

  - This item reverses image of right input(SDI-R 

     or HDMI-R) left and right in 3D mode.

• 3D L/R SWAP

  - This item sets priority of the first video frame 

    for the left/right input in 3D mode.

  - This item sets the priority of left/right input 

     for the left screen in PBP mode.

• SWAP INTERVAL(Sec.)

  - This item sets the swap interval time for 2D 

    SWAP mode.

   - Available value: 1~5 Seconds. 

• PAYLOAD ID

  - This item displays input signal’s ID when the  

    3D input format is DUAL STREAM.

PAGE I >> PAGE II

HD DIPLAY MODE

TIME CODE ENABLE

ORBITER CIRCUIT

CLOSED CAPTION

608 CHANNEL SELECT

708 SERVICE SELECT

PAGE II >> PAGE III

3D INPUT FORMAT

S.STREAM CH.

S.STREAM FORMAT

LEFT CH. MIRROR

RIGHT CH. MIRROR

3D L/R SWAP

SWAP INTERNAL(SEC.)

PAYLOAD ID IN-L:  -  

16:9

VITC

OFF

OFF

CC 1

SERVICE 1

DUAL SREAM

(SDI/HDMI) LEFT

LINE BY LINE

DISABLE

DISABLE

ON

2

IN-R:  -

TDM-243W

TDM-243W

TDM-243W

TDM-243W

5. Menu Operations

  [4] DISPLAY & 3D