TV Logic TDM-243W, Operation Manual

18 Multiformat 3D Monitor   

  [4] GPI

5. Menu Operations

    - The selectable values are as follows :

• MONITOR ID

  - Sets the ID of each monitor for the TV Logic  

     control protocol or DYNAMIC UMD using RS- 

     422/485 communication.

  - Available values are between 0, 1, 2 ~ 125.

• UMD DISPLAY

  - Used to set input source ID mode.

  - Available modes are OFF, UMD, ANC,  

     D-UMD(S-8C), D-UMD(S-16C) and D-UMD(D-8C).

  - If UMD menu is selected, characters or tally  

    data in the black bar displays on the bottom  

    of the screen. The vertical aspect ratio of the  

     image changes on the screen as the bar on  

     the bottom of screen appears.

  - In the USER ASPECT mode, the UMD bar    

     displays semi-transparently and the screen  

     keeps its USER ASPECT ratio.

  * UMD : Displays user customized 8 characters  

     on screen.

  * ANC : Displays characters embedded in SDI  

     signal.

  * D-UMD(S-8C) : Displays incoming data of 8  

     characters and tally signal from TSL protocol  

     (V3.1).

   * D-UMD(S-16C) : Displays incoming data of       

     16 characters and tally signal from TSL protocol  

     (V3.1).

   * D-UMD(D-8C) : Displays incoming data of two 

    pairs of 8 character strings and tally signals  

     from TSL protocol (V3.1).

• UMD CHARACTER

  - Customizes the characters for Under Monitor  

    Display.

  - Alphabets, numbers and special symbols are  

     available.

  - Maximum of 8 characters are available.

PAGE II >> PAGE III 

MONITOR ID

UMD DISPLAY

UMD CHARACTER

D-UMD TALLY TYPE

TALLY 1 COLOR

TALLY 2 COLOR

TALLY 3 COLOR

TALLY 4 COLOR

0

OFF

CHANNEL L1

TDM-243W

Menu

Classifi-

cation

Settable Values

PIN 

1~6

NONE, HDMI CHANNEL, SDI 

CHANNEL, 3D MODE, 2D MODE, 

TALLY R, TALLY G, TALLY Y, UNDER 

SCAN, 1:1 SCAN, ASPECT, H/V 

DELAY, BLUE ONLY, MONO, 16:9 

MARKER, 4:3 MARKER, 4:3 ON 

AIR MARKER, 15:9 MARKER, 14:9 

MARKER, 13:9 MARKER, 1.85:1 

MARKER, 2.35:1 MARKER, 1.85:1&4:3 

MARKER, CENTER MARKER, SAFETY 

AREA 80%, SAFETY AREA 85%, 

SAFETY AREA 88%, SAFETY AREA 

90%, SAFETY AREA 93%, SAFETY 

AREA 100%, 708, 608(LINE 21), 

608(ANC) 

PAGE I >> PAGE II 

GPI 1

GPI 2

GPI 3

GPI 4

GPI 5

GPI 6

GPI 7

GPI 8

HDMI CHNNEL

SDI CHANNEL

3D MODE

2D MODE

TALLY R

TALY G

POWER ON

GND

TDM-243W