TV Logic TDM-243W, Operation Manual

4 Multiformat 3D Monitor   

1. Caution

•

 Always use set voltage. 

  - AC 100 ~ 240V

  - DC 24V (TDM-243W)

• 

All operating instructions must be read and   

   understood before the product is operated.

   These safety and operating instructions must

  be kept in safe place for future reference.

• 

All warnings on the product and in the  

  instructions must be observed closely.

• 

All operating instructions must be followed.

• 

Do not use attachments not recommended

    by the manufacturer. Use of inadequate 

   attachments can result in accidents.

• 

This product must be operated on a power 

  source specified on the specification label. 

• 

If you are not sure of the type of power supply 

  used in your home, consult your dealer or local 

  power company. For units designed to operate 

  on batteries or another power source, refer to 

  the operating instructions.

• 

The power cords must be routed properly 

  to prevent people from stepping on them or 

  objects  from resting on them. Check the cords 

  at the plugs and product.

• 

In case of using other 24V DC adapters instead

  of the standard adapter provided by the

  manufacturer, please check the proper load 

  capacity (or current capacity) and use an    

  adapter with stable voltage. 

• 

Do not overload DC outlets or extension cords.

  Overloading can cause or electric shock. 

• 

Never insert an object into the product through

  vents or openings. High voltage in the

  product, and inserting an object can cause

  electric shock and/or short internal parts. For

  the same reason, do not spill water or liquid on 

  the product. 

• 

Do not attempt to service the product yourself. 

  Removing covers can expose you to high voltage

  and other dangerous conditions. Request a    

  qualified service person to perform servicing.

• 

 If any of the following conditions occurs, unplug 

  the power cord from the DC outlet, and request 

  a qualified service person to perform repairs.

  a. When the power cord or plug is damaged.

  b. When a liquid was spilled on the product or  

  when objects have fallen into the product.

  c. When the product has been exposed to rain  

  or water.

  d. When the product does not operate properly

   as described in the operating instructions.

  Do not touch the controls other than those    

  described in the operating instructions.

  Improper adjustment of controls not described  

  in the instructions can cause damage,

  which often requires extensive adjustment    

  work by a qualified technician.

  e. When the product has been dropped or    

 damaged.

  f. When the product displays an abnormal    

  condition. Any noticeable abnormality in the

  product indicates that the product needs    

 servicing.

• 

In case the product needs replacement parts,

  make sure that the service person uses

  replacement  parts specified by the manufacturer, 

 or those with the same characteristics and   

  performance as the   original parts. Use of 

  unauthorized parts can result in fire, electric 

  shock and/or other danger.

• 

Upon completion of service or repair work,

   request the service technician to perform safety 

  checks to ensure that the product is in proper 

  operating condition.