12
Direct Input/Output Selection Area
It is also possible to directly select Inputs and Outputs using the buttons and drop down
menus located in the Input and Output Selection Areas to the left and right.
To directly send an input to an output, open up the drop down menu to the right of
the Output and select the Input to route to it. The connection line will move to
indicate the new route.
To route an Input to more than one Output, select the Outputs you wish to affect in
the Output Selection Area on the right (each button will turn grey to indicate it is
selected). After you have selected all of the Outputs you wish to affect, select the
Input you wish to send to those Outputs from the buttons in the Input Selection
Area on the left. The connection lines will move to indicate the new routes.
