1 Press [PAUSE] key to see time shift OSD as below:
2 You can press [Left/Right] to move the slide to left or right. Press [OK]
key to play the point where the slide is.
3 You also can press [Pause] /[fast back]/[slow /back] can realize these
function. Then it will enter the mode which is playing the recorded
program on HDD. (like the picture below) Then you can do pause, fast
forward, fast back, slow forward, and slow back.
1. Press record key to start recording
2. Press record key again to set and adjust recoring duration time
10.4.2 Record
3. Press [Stop] key first time to end the playing mode.
Press [Stop] key second time to stop the recording
4. Press blue key to show the recorded files fastly,press OK to play the
selected file.
11. Hotkey
11.1 Power
1 Press [Power] Key can enter the Standby state
2 In Standby state, press [Power] Key again can call back the unit and go
on play the previous channel
3 User can also disconnect the device’s main power to end the Standby state.
11.2 Channel Up/Channel Down
In full screen, press [CH+/CH-] to change channel.
11.3 Volume Up/Volume Down
In full screen, press [VOL+/VOL-] to adjust volume.
11.4 Number 0~9
In full screen, use number key and press [OK] on the Remote Control
Unit to change channel.
11.5 TV/RADIO
In TV mode, pressing [TV/RADIO] key can switch to Radio mode. In Radio
mode, press [TV/RADIO] key to switch to TV mode.
Notes: Time Shifting/recording will only be available when USB/ HDD is
connected to system and read/write speed is high enough to do that.
14/01
Basic Operations
32
