16
* The 4:3 Pan & Scan will adjust the image of the 16:9 multimedia file to the 4:3 of the TV screen by scaling
the image. (Currently, not support this mode)
* 16:9 can adjust any ratio of the multimedia file to the TV screen with the original image.
*
Video Port :
If you fail to see the initial TViX HD screen after turning the unit and TV on, make sure you
have chosen the right TV out option by repeatedly pressing the TV Out button on the remote control.
Composite/S-Video is a default.
*
HDMI Audio Auto/Manual
: Select Off when you use audio Amplifier or external sound with HDMI.
*
Video Out Mode :
Select this when you connect the video through a component (YPbPr) or HDMI cable.
With HDMI setting, you can select the output resolution among Auto EDID/480P/720P/1080i/1080P. Setting
it to 1080i will work on all HD grade TVs.
HDMI : Auto EDID/,480i/576i, 480P/576P, 720P, 1080i,1080P
Component/DVI : 480i/576i, 480P/576P, 720P, 1080i,1080P
*
Luminance Level :
Auto / 0-255 / 16-235, This option is enabled with HDMI or DVI Video out. (Auto EDID
is not used)
*
Apply Now
: After configuration, please press ‘Apply Now’ to save the Video out state.
If you want to exit the Setting, Select the EXIT button(
) and then press OK on the remote control.