50
6.4.8 Wireless Network
[ Connect USB wireless module ]
Connect the USB module into enclosed cradle after connecting the AP Router to a PC.
You should not connect the USB module to TViX without cradle. If you connect it by force, the TViX can
be damaged.
Please refer to the TViX homepage(www.TViX.co.kr/Eng) for a list of compatible wireless devices.
Connect the cradle to the TViX-only after you have shut down the TViX.
[ Configure Wireless Network ]
After booting, press SETUP-NETWORK- “Wi-Fi IP setting” and select DHCP or static IP.
To set the Wi-Fi IP, refer to
3.4.3 Setting Network Configurations in TViX HD
After selecting DHCP, press “Search Wi-Fi Network” for
searching your AP or AP router.
After the interval of searching, you can see following popup menu.
Select the AP you want to connect with.
A red colored icon means the AP uses
WEP
(Wired Equivalent
Privacy) and a blue colored icon means a non-WEP AP.
Currently supported of the WEP (Wired Equivalent Privacy) settings
are the OPEN System and Shared System. Also, the WEP 64-Bit
key is only supported and WPA (Wired Equivalent Privacy) and
RADIUS (Remote Authentication Dial-In User Services) server are not supported.
※
You have to configure the WEP setting of the AP using the
AP’s instruction in advance.
Insert the network key using the remote’s numeric keys. As you
press the MENU button, the input mode for the remote will be
circulated from a lower alphabet, an upper alphabet to a numerical
input mode.
☞
To delete a character, press the Capture/Delete button.
If you insert proper network key, you could see well-formed TViX
Wi-Fi Network Info like following.
If the network key is wrong or the AP doesn’t work with DHCP
setting, you would see some-field-missed in TViX Wi-Fi Network Info
POP UP. Those fields which you might always see are SSID and
MAC
If you still have the problem after filling up correct key, please
recheck your setting of AP or reconnect the USB port.
Network disk setting
:
This setting is same to the wired network setting. To configure the network disk,
refer to TViX FAQ or manual of NetShare
Caution
※
※
If you connect to a secured AP, the network performance will be 10% lower than an unsecured
AP.
In wireless connectivity connecting the Wireless USB to TVIX Device. TVIX kit needs to be
powered off initially. and then Powered ON .Then on the Network setting Menu WIFI IP setting will
be enabled
For the better Wi-Fi signals, you’d better adjust the position of AP and USB module
If you play high definition files over Wi-Fi, you will see the stutter. Also, depends on the
environment, you may experience stuttering when you play DVD files.
If you use an USB Wi-Fi adapter with other USB device, it may not work properly.
* If you want to change AP, you have to search the wireless network like Step 2.
* For the detailed wireless network guide, please refer to the TViX website(tvix.co.kr/eng)
