SEAT ASSEMBLIES
REMOVAL
Rear seat (passenger seat) removal
l
Insert the ignition key into the seat lock (A).
l
Turn it in clockwise, then pull and release the
front section of the seat (1) first, followed by
the rear section as shown in the figure.
(Fig. 2.1)
l
To reassemble the rear seat, reverse the
removal procedure.
Utility box removal
l
To remove the utility box (A), remove the rear
seat. (refer Fig. 2.1)
l
Take out the utility box by dislocating it from
the seat release cable (B). (Fig. 2.2)
l
To reassemble the utility box, reverse the
removal procedure.
Front seat (rider seat) removal
l
To remove the front seat (2), remove the rear
seat (refer Fig. 2.1) and take out the key from
the lock.
l
Pull the seat release cable (A) to release seat
lock. Keeping the seat release cable pulled, lift
the seat from rear end and slide it backward to
remove. (Fig. 2.3)
l
To reassemble the front seat, reverse the
removal procedure.
Caution:
Make sure that the seat is locked securely
in position after installation.
Fig. 2.1
Fig. 2.2
Fig. 2.3
TVS APACHE RTR 200
SERVICE MANUAL
PERIODIC MAINTENANCE
A
A
1
B
2
A
2-3
