KNOW YOUR TVS APACHE RTR 200 Fi4V with ABS
Note
Use appropriate head lamp beam ‘high / low’ as per
the traffic and road conditions for your safety and to
avoid inconvenience to other riders.
It is strongly recommended to ride the vehicle in
‘low beam’ during day.
Once the engine is started the head lamp glows
automatically. Only head lamp beam (high/low) can
be controlled using beam control switch.
Head lamp intensity will reduce by 50% if the
engine is kept idle for more than 20 sec (approx).
Pass by system will not work if the engine cut off
switch is turned ‘OFF’.
Warning
1. Electric starter switch
Ensure the transmission is in neutral or else press the
clutch lever before engaging the electric starter
switch ‘ ‘. Release the electric starter switch after
the engine has started.
If the electric starter switch is pressed more than
3 seconds continuously, the starter motor gets
disabled automatically and will not crank the
engine. The motor cranks the engine only after
3 seconds or if the switch is released and
repressed again.
HANDLE BAR RIGHT SIDE
4
3
1
2
32
