50
After cleaning and checking the gap, reinstall the
spark plug and tighten by hand to avoid cross
threading. Finally tighten using spark plug spanner.
Do not over tight or corss thread the spark plug. After
reassembling the plug fix back the suppressor cap
and ensure its proper fitment.
Always use only recommended make and type of spark
plug.
Replace spark plug every 12000 km.
Don’t remove the spark plug when the engine is hot.
Cover the spark plug hole with a clean cloth when the
plug is removed, to prevent dust / water entry.
It is advisable to tight the new spark plug by hand till the
end and then loose. Again re-tight the spark plug by 1/8
of rotation after sealing by using only the hand tool.
Since the hook type spark plug is used, it is not advised
to adjust the plug electrodes as it may damage the
electrodes.
Caution
ENGINE OIL LEVEL
Check the engine oil level periodically.
1. Place the vehicle on centre stand on a flat surface.
Wipe-off the surroundings of gauge oil level.
2. Remove the gauge and wipe it clean.
3. Fix the gauge back to its mounting hole. Do not
thread in.
4. Take out the gauge and check the oil level. The
level should be between minimum and maximum
level marks of the gauge as shown in the figure.
5. If the oil is less than the minimum level, add TVS
TRU4 SKUUTA oil (SAE 10W30 API-SL, JASO
MB) upto the maximum level mark.
Minimum
Maximum
