45
45
• After entering the BT pairing mode, open the
mobile app and just press the ‘Connect icon’ of
the mobile app to establish the connection with
the cluster.
• On pressing this icon, the app opens a screen
where you will be asked to grant permission to
turn ‘ON’ your smart phone’s Bluetooth if it is in
‘OFF’ condition. Turn ‘ON’ the Bluetooth.
• Else, press the ‘Scan Device’ icon to initiate
the search incase the app is not searching
automatically.
• The app searches and lists the available
clusters. Just select the listed cluster. The app
communicates with the cluster and the cluster
generates a pass key.
Enter this pass key in the app screen to complete the
connection.
For the first time pairing, the connected instrument
cluster should be in ‘BLUETOOTH PAIRING MODE’.
During the course of pairing process, there is any
occurrence of error, the connected instrument cluster
should be turned ‘OFF’ and ‘ON’, and the application also
need to be restarted.
Please remember that, all the smart phones are not
compatible for pairing with the TVS RONIN motorcycle’s
connected instrument cluster.
During the search of Bluetooth devices in app, if the
vehicle connected instrument cluster’s Bluetooth device
ID is not visible, try for one or two more iterations, along
with forget device from bluetooth history as explained
earlier.
If the phone enters battery saver mode, auto-pairing
during active connected ride might not happen. It takes
maximum of five minutes for auto-pairing and it can
happen in vehicle running below 10 km/h speed or
engine at idling or engine off condition.
Note
On connecting with the smart phone successfully,
the instrument cluster displays.
Auto-pairing happens in active connected rides only
if the application is locked in the RAM in multitasking
screen of the phone with manufacturer’s customised OS
(Ex. : MI, Vivo etc.).
In case of Android phones with Android OS version
above 8.0 for App to work seamlessly, any battery
optimisation setting to be removed in the TVS Connect
app and GPS shall be allowed to run in background in
high accuracy mode.
Even if your phone’s Bluetooth is already paired to other
gadgets like smart watch, health band or helmet, the
auto-pairing works with your TVS RONIN motorcycle’s
connected instrument cluster.
If the application unfortunately stops due to unforeseen
circumstances, Close and reopen the application and do
connection process. Try for one or two more iterations,
along with Bluetooth forgetting steps as explained
earlier.
Note
If the pass key entered wrongly then the instrument
cluster displays the following message.
