l
On pressing the ‘Set’ button, ‘CLOCK MODE’
scrolls in running display and the hour digit of the
clock blinks.
l
Now, press the ‘Mode’ button to increase the
hours while hour digits are blinking.
l
On pressing the ‘Set’ button again the hours of the
clock is set and the minute digit blinks.
l
Now, press the ‘Mode’ button to increase the
minutes while minute digits are blinking.
l
Else, on pressing the ‘Set’ button again the
minutes of the clock is set and the hour format
‘AM’ or ‘PM’ blinks.
l
Press the ‘Mode’ button to change the hour
format ‘AM’ or ‘PM’.
l
Press the ‘Set’ button once again to set hour
format and to come out from clock setting.
Setting the Shift RPM
l
Press and hold the ‘Mode’ button till ‘MPH’ icon
blinks in display.
l
Release and press the ‘Mode’ button twice so that
the ‘RPM’ icon blinks.
l
Press the ‘Set’ button to reach shift RPM setting
mode the ‘SHIFT RPM’ icon scrolls in running
display for one cycle. Previous RPM setting value
is displayed in the bar display and LED will glow.
21
Note
By default the shift rpm is set to 7000 RPM. You can
set it to your convenience as per your riding habit.
COOLING SYSTEM
TVS RTR 200 Fi4V is designed with an external oil
cooler with stone guard arrangement for optimal
engine cooling.
l
Now, press the ‘Mode’ button to increase the
RPM (multiples of 1000) in cyclic fashion. Once
the user starts updating, the LED stops glowing.
l
Pressing the ‘Set’ button exits the setting. Once
the shift RPM is set, the LED again glows till this
mode is exit.
KNOW YOUR TVS RTR 200 Fi4V
