12
5. High/low beam switch
With the head lamp ‘ON’, press the switch towards
‘ ’ to operate head lamp high beam or press it
towards ‘ ’ to operate head lamp low beam.
Warning
Use appropriate head lamp beam ‘high / low’ as per
the traffic and road conditions for your safety and
to avoid inconvenience to other riders. It is strongly
recommended to ride the vehicle in ‘low beam’ during
day.
1. Right hand brake lever
Front brake system can be operated by pressing the
right hand brake lever gently towards the throttle
grip. The brake lamp glows on application of either
right hand or left hand brake lever.
2. Throttle grip
Engine speed is controlled by the rotation of the
throttle grip. Twist it towards you to increase the
engine speed and twist it away from you or release it
to decrease the engine speed.
3. Light switch
Light switch has the following position. Working of
switch at various position are as follows:
OFF: All the lamps are turned ‘OFF’ except DRL lamp
and tail lamp when the switch is positioned at ‘
’ even though the engine is running.
ON: The head lamp, speedo lamp, tail lamp and
license plate lamp glows when the switch is
positioned at ‘ ‘ and engine is running.
4. Electric starter switch
Press the starter switch ‘ ’ to start the engine
electrically along with the application of either front
or rear brake.
HANDLE BAR RIGHT SIDE
7
7
7
1
4
2
7
3
