4
EASY 1-MT
Issued 05/00
DESCRIPTION OF FUNCTION
Main compressed
air connection
The arrows always show the direction of flow
Figure 2
The fluidized powder in the powder hopper is sucked into the injector
by means of the conveying air (
1
- red hose). The powder/air mixture
reaches the powder gun through the powder hose (
2
). The powder is
electrostatically charged at the nozzle of the gun. In addition, an elec-
trostatic field is created between the gun nozzle and the grounded
object. The charged, and sprayed powder adheres to the surface of the
object.
The powder is fluidized by air forced through a porous plastic plate
from below. The powder acquires, thereby, fluid-like characteristics.
The conveying air, supplementary air, and rinsing air are set on the
control unit, and the fluidizing air is set on the fluidizing unit on the
trolley. The functioning of the injector is described in the EasyFlow
injector operating instructions.
2
1
