25
Montage Trägergestell
Assembly of support frame
Vormontage Anker gerade
Befestigen Sie die Anker, gerade (Fig. 29, Nr. 7)
an den geraden Enden folgender Profile:
• je 2 mal an den Enden der Profile
(40x80x840 mm D1, D2 /480mm D4)
(Fig. 29, Nr. 3)
• 2 mal am Profil 40x40x800 mm (Fig. 29, Nr. 4)
Bringen Sie ein Kombiprofil (800 mm Fig. 30,
Nr. 5.1) in eine T-Nut des Profils
(40x40x800 mm, Fig. 30, Nr. 4) ein.
3
7
8
3
4
5.1
4
Fig. 31
Fig. 32
Insert a combi profile (800mm Fig. 30, No. 5.1)
into a T-slot of the profile
(40x40x800mm Fig. 30, No. 4).
Pre-assembly straight anchor piece
Attach the straight anchor pieces (Fig. 29, No. 7)
to the straight ends of the following profiles:
• 2 at each end of the profiles (40x80x840mm D1,
D2/480mm D4) (Fig. 29, No. 4).
