VERA RF600i Assembly Instructions
35
Figure 4.17.1 - Mounting of the last subwoofer
4.17 Setting up the last subwoofer in a flown system
Continue to set up of the subwoofer system as follows:
WARNING
WARNING
WARNING
1. Please note that setting up the subwoofer system always requires two persons!
2. Place the last subwoofer on the floor. Place a pad under the loudspeaker to avoid damage.
3. Insert the splay links and the brackets of the subwoofer into the openings at the top of
the subwoofer.
4. Attach the last loudspeaker in the flown system using two cylinder screws, item 2 and two
lock washers, item 3 from the subwoofer scope of delivery.
5. Make sure to properly insert the lock washer as described in section 4.7!
6. Make sure that the screws with the lock washers are attached (but not tightened) to the
subwoofer on the left and right side.
4.
3.
4.
