background image

6-19

STATEMENT OF WARRANTY

LIMITED WARRANTY: 

 THERMADYNE

®

 warrants that its products will be free of defects in 

workmanship or material.  Should any failure to conform to this warranty appear within the time 
period applicable to the THERMADYNE products as stated below, THERMADYNE shall, upon notification 
thereof and substantiation that the product has been stored, installed, operated, and maintained 
in accordance with THERMADYNE’s specifications, instructions, recommendations and recognized 
standard industry practice, and not subject to misuse, repair, neglect, alteration, or accident, correct 
such defects by suitable repair or replacement, at THERMADYNE’s sole option, of any components or 
parts of the product determined by THERMADYNE to be defective.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, 

EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE.
LIMITATION OF LIABILITY:  

THERMADYNE shall not under any circumstances be liable for special 

or consequential damages, such as, but not limited to, damage or loss of purchased or replacement 
goods, or claims of customers of distributor (hereinafter the “Purchaser”) for service interruption.  
The remedies of the Purchaser set forth herein are exclusive and the liability of THERMADYNE with 
respect to any contract, or anything done in connection therewith such as the performance or breach 
thereof, or from the manufacture, sale, delivery, resale, or use of any goods covered by or furnished 
by THERMADYNE whether arising out of contract, negligence, strict tort, or under any warranty, or 
otherwise, shall not, except as expressly provided herein, exceed the price of the goods upon which 
such liability is based.

THIS WARRANTY BECOMES INVALID IF REPLACEMENT PARTS OR ACCESSORIES ARE 

USED WHICH MAY IMPAIR THE SAFETY OR PERFORMANCE OF ANY THERMADYNE 

PRODUCT.
THIS WARRANTY IS INVALID IF THE PRODUCT IS SOLD BY NON-AUTHORIZED 

PERSONS.

This warranty is effective for the time stated in the Warranty Schedule beginning on the date that the 
authorized distributor delivers the products to the Purchaser.
Warranty repairs or replacement claims under this limited warranty must be submitted by an authorized 
THERMADYNE repair facility within thirty (30) days of the repair.  No transportation costs of any kind 
will be paid under this warranty.  Transportation charges to send products to an authorized warranty 
repair facility shall be the responsibility of the Purchaser.  All returned goods shall be at the Purchaser’s 
risk and expense. This warranty supersedes all previous THERMADYNE warranties.

Summary of Contents for Spool gun

























Reviews: