Rebar Scanner A60+
4
Chapter III Instruction of operation interface
3.1 Keyboard introduction
There are 9 keys in total on the keyboard.
key is used as
power switch of instrument
；
ENTER key is used to confirm operation
in parameter setting and automatic calibration operation of instrument;
SAVE key is used to store measured values; ESC key is used to return
last menu in operation; RANGE key is used to switch the first
nominal range and the second nominal range; --the first nominal
range
，
used in the condition of less thickness of covering layer
，
--the second nominal range
，
used in the condition of larger thickness
of covering layer; ←, ↑, → and ↓ keys are used respectively in
auxiliary functions like menu selection, digit add & subtract and
cursor movement etc.
3.2 Brief introduction of operation
3.2.1 Start
-up
Press the
key on instrument panel to switch on the instrument.
Then begin operation. Start-up interface is shown as figure 3-1.
Figure 3-1 Start-up interfaces
Rebar Scanner
Version:1.4
Battery:9.0V
GALAXY HI TECH
