Twin Eagles TEBQ30G-C, Installation Use And Care Manual

3 

GAS SAFETY REQUIREMENTS 

Each appliance is set and tested at the factory for the type of gas supply to be used. Identify the type of 

gas, either natural gas (NG) or Liquid Propane (LP) gas and make sure that the marking on the data plate (rating 
plate) matches the gas being supplied to the grill. This information is found on the data nameplate, located on 
the bottom right hand side of the firebox near the regulator.  A second label with model number and serial 
number is located under the right side of the control panel on the fire box. Remove the drip pan to visually 
access the nameplate from the front of the grill. 
 

All gas connections should be made by a qualified technician and in accordance with local codes and 

ordinances.  The installation must conform with local codes or, in the absence of local codes, with either the 
National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas Propane Installation Code, CSA B149.1 or 
CAN/CGA-B149.1, Natural Gas Installation Code or CAN/CGA-B149.2, Propane Installation Code. 

WARNING: 

ENSURE THAT THE GAS SUPPLY HOSE DOES NOT COME IN CONTACT WITH ANY HOT 

SURFACE OF THE GRILL. 

NEVER CONNECT THE GRILL TO AN UNREGULATED GAS SUPPLY. 

L.P. GAS SAFETY REQUIREMENT 

The LP-gas supply cylinder must be constructed and marked in accordance with the 

Specifications for LP-gas 

Cylinders 

of the U.S. Department of Transportation (D.O.T.) or the National Standards of Canada 

CAN/CSA-

B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods, and Commission, 

as 

applicable; and  
 

1. Provided with a listed overfilling prevention device.  
2. Provided with a cylinder connection device compatible with the connection for outdoor cooking 

appliances.  



It must be provided with a shut-off valve terminating in gas tank valve outlet. It must include a collar to 
protect the cylinder valve. The cylinder supply system must be arranged for vapor withdrawal.  



Do not operate the gas grill indoors or in any enclosed area. If the gas grill is not in use, the gas must be 
turned off at the supply cylinder. If the grill is to be stored indoors, disconnect the gas supply cylinder 
and leave the cylinder outdoors out of reach of children and must not be stored in a building, garage or 
any other enclosed area.