OPTIONAL DRAIN PUMP
6
The
Twin Eagles Drain Pump
is designed to remove drain
water from ice machines installed in areas without direct
drainage access. The sealed reservoir pump collects the
melted ice water and pumps it to a maximum lift of eight (8)
feet (2.44 meters) through
3
⁄
8
” I.D. vinyl tubing to a drain.
This pump has been evaluated for use with water only.
NOTE: Reasonable care and safe methods should be prac-
ticed. Do NOT work with energized electrical equipment
in a wet area. Read and follow the installation instructions
listed in this manual.
Risk of electric shock - This pump is supplied with a
grounding conductor and grounding-type attachment plug.
To reduce the risk of electric shock, be certain that it is con-
nected only to properly grounded, grounding-type recep-
tacle.
Maintenance
The following items require review on a regular basis.
1. Check that the vent line is open, free of kinks/sharp
bends, so that air flows freely from the pump reservoir.
2. Check that the discharge tubing is free of foreign mate-
rial (algae, etc.) and kinks/bends. Confirm that the
check valve is operational by observing that the water
flow is evident in one (1) direction only - out of the
pump. Remove and clean as required.
Figure 7
Drain
Access
Access
panel
Ice Machine
6
3
⁄
4
”
(17.1cm)
8
3
⁄
8
”
(21.3cm)
18”
(45.7cm)
14
3
⁄
4
”
(37.5cm)
2
3
⁄
8
” (6.0cm)
4
1
⁄
16
”
(10.3cm)
9
⁄
16
” (1.4cm)
21
1
⁄
2
”
(54.9cm)
Figure 6
Figure 5
Access
panel
1
1
⁄
2
” Drain pipe
Summary of Contents for TEIM15-E
Page 1: ...Outdoor Ice Maker Twin Eagles 18909A 04 15 Model TEIM15 E ...
Page 19: ...19 ...
Page 20: ...41014002 revA 4 23 15 20 ...
