5
Fig. 3
Fig. 4
EE
EE
AA
BB
AA
BB
Fig. 2
CC
N
F
CC
CC
M
A
Hardware Used
Hardware Used
AA
BB
BB
CC
CC
EE
C
B
E
x 4
x 1
x 6
x 4
x 4
x 8
Bolt
Bolt
Bolt
Wood Dowel
Wood Dowel
Washer
2. Attach the Hinge (G-2) to the Left Front Door (I) and
Right Front Door (J), tighten Screws (DD) through
the pre-drilled holes.
3. Insert Wood Dowels (CC) to the holes on the Base
Panel (A), push Leg (M) snug to the Base Panel,
using Bolts (AA) and Washers (EE) through the
pre-drilled holes in the Base Panel(A) and then
tighten.
Attach Support Panel (N) to Base Panel (A) by
using Bolts (BB) through the pre-drilled holes in the
Base Panel (A) with Phillips head screwdriver and
tighten.
4. Insert Wood Dowel (CC) into the holes on the Left
Side Panel (E), Right Side Panel (F), Push Left Side
Panel (E), Right Side Panel (F) snug to the Base
Panel
(A).
Locate Center Left Side Panel (B) and Center Right
Side Panel (C), using Bolts (BB) through the
pre-drilled holes on the Center Left Side Panel (B)
and Center Right Side Panel (C) and tighten.
I
DD
J
G-2
Hardware Used
DD
GG
x 8
x 4
Screw
Hinge (G-1,G-2)
