6
Fig. 8
DD
GG
Fig. 6
Fig. 7
G
F
B
C
II-1
II-2
RR
H
H
Hardware Used
Hardware Used
CC
DD
GG
GG
RR
RR
x 6
x 2
x 6
x 2
x 2
Bolt
1/4 in. x 7/8 in.
Bolt
1/4 in. x 5/8 in.
Washer 16mm
Washer 16mm
Allen Key
Angle Iron
Allen Key
6. Carefully lift the Glass Top (G) on the top of the
cabinet . Use Allen Key (RR) screw the Bolts (CC)
and Washers (GG) into the metal support post
through the pre-drilled holes in the Left Frame (F),
Middle Panel (B) and Right Panel (C). as Shown In
Diagram.
HAND TIGHTEN ONLY.
7. Insert Glass Shelf (H) into the Clips (II), allow Glass
Shelf (H) to rest on the Shelf Pad (KK), then tighten
the Clip (II-1) with Bolt (II-2).
8. Locate the Angel Iron (QQ) to the bar of Base (A),
using Bolt (DD) and Washer (GG) through the
pre-drilled hole.
Hardware Used
II
x 4
Clip (II-1,II-2)
RR
Allen Key
