background image

INTRODUCTION

TABLE OF CONTENTS 
 

Key Features  ...................................................... 

2

WARNINGS: ......................................................   2
Tools required: ................................................... 

3

Model Compatibility: .........................................   3
FIRST STEP: ......................................................   3
INSTALLATION-RADIO ASSEMBLY:  
   Attaching Audio System to Windshield ...........    4-5
INSTALLATION-WINDSHIELD:  
  Optional Locking Bracket .................................    5
INSTALLATION-ELECTRICAL:
   Wiring Harness  ...............................................    6
FINAL INSTALLATION:
   Windshield & Windshield Lock .......................     7
ACCESSORIES/NOTES ......................................  8

K E Y   F E A T U R E S

  ·  Easy Installation 
  ·  OEM Fit and Appearance
  ·  Weatherproof
  ·  System Detaches with Windshield
  ·  100W (50W x 2) Audio Output Power 
  ·  Integrated Amplified Antenna
  ·  Heavy-Duty Waterproof AM/FM Radio with  
     Weatherband and Weather Alert
  ·  AUX Audio Input (For use with iPods and  
     MP3 Players 
  ·  Radio Retains station Presets and Clock  
     Time When Detached (Power Disconnected) 
  ·  Windshield Lock (Optional)

W A R N I N G S

 

INSTALLATION

 

The motorcycle’s battery must be disconnected 

before installation and not reconnected until 

the installation is complete.

OPERATION

 

Riding a motorcycle requires your full  

attention at all times. Do not attempt to  

operate or adjust the audio system  

while riding.

WATER/MOISTURE EXPOSURE 

 

The components and overall product design 

are weather-resistant which means they can 

survive exposure to rain and normal outdoor 

moisture. However, care should be taken  

especially when washing your motorcycle  

not to expose the system to high pressure 

(hose nozzle) water spray. Since the system 

easily detaches from the motorcycle with the 

windshield, we recommend removing the 

windshield/audio system when washing  

your ride. Evidence of excessive water  

exposure will void the warranty.

2

Summary of Contents for TAWAS100HD









Reviews: