background image

Turn the vibrato 

rate

 knob to choose whether to link the vibrato to the 

MIDI clock.

 

 

Above 12 o clock the setting is on, below the setting is off.

 

The setting is indicated by ON/OF on the numeric display

 

Velocity controls LFO1

 

Turn the vibrato 

depth

 knob to choose whether to control lfo1 with MIDI 

velocity. With this option activated, the MIDI velocity will control the 

depth of lfo1 when the rate of lfo1 is above zero. When the rate is zero 

(stopped lfo) MIDI velocity will override the lfo and directly modulate all 

parameters associated to the lfo. Use the depth knob to adjust the 

amount of effect. 

Above 12 o clock the setting is on, below the setting is off.

 

The setting is indicated by ON/OF on the numeric display 

The numeric display will indicate “Ve” followed by “On” or “Of” 

Mod wheel controls LFO2

 

Turn the vibrato 

depth

 knob to choose whether to control lfo2 with the 

mod wheel. With this option activated, the mod wheel (CC1) will control 

the depth of lfo2 when the rate of lfo2 is above zero. When the rate is 

zero (stopped lfo) the mod wheel will override the lfo and directly 

modulate all parameters associated to the lfo. Use the depth knob to 

adjust the amount of effect. 

Above 12 o clock the setting is on, below the setting is off.

 

The setting is indicated by ON/OF on the numeric display 

The numeric display will indicate “C1” (for MIDI CC1) followed by “On” 

or “Of” 

MIDI Aftertouch controls LFO3

 

Turn the vibrato 

depth

 knob to choose whether to control lfo3 with the 

mod wheel. With this option activated, MIDI aftertouch will control the 

depth of lfo3 when the rate of lfo3 is above zero. When the rate is zero 

Summary of Contents for MegaFM






















Reviews: