TWM EXTRA 330L 60, Instruction Manual

P. 1

Apply thread locker

Apply epoxy glue. 

Pierce the shaded portion
covering film.

Apply instant glue
(C.A.glue , super glue.)

Ensure smooth non-bindin g
movement while assembling .

Do not overlook this symbol !

Check all parts.  If you find any defective or missing parts contact your local dealer.  Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly.  Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement.  The
manufacturer will replace any defective parts, but will not extend to the parts that are good before 
gluing to defective parts during assembly.  Warranty will not cover any parts modified by customer

.

Read through the manual before you begin, so you will have an overall idea of what to do.

Symbols used throughout this instruction manual comprise of the following : -

1

2

3

Assembl e left and right
sides the same way.

Peel off shaded portion
covering film.

Drill holes with the specified
diameter (here:  3mm) .

Pay close attention here!

Cut off shaded portion.

Must be purchase d separatel y !

Warning!

3m m

P. 3 -11

I N D E X

BEFORE YOU BEGIN

PARTS LIST

ASSEMBLY

SAFETY PRECAUTIONS

P. 1

P. 2

P.11

BEFORE  YOU  BEGIN

A156SPO25891108