2018/06/06 14:03
9/21
Le Preamp Series User's Manual
User's manuals - http://wiki.two-notes.com/
You will find in this table a description of the volume, tone and channel selection options.
1
Channel A
footswitch
This footswitch activates the clean Channel A or changes the page/parameter in
MIDI programming. If the Channel A is already selected, pressing a second time
will put your Le Preamp in bypass mode
2
Channel A
Input Gain
Determines the amount of gain for your clean tone. Increasing the gain can lead
to more signal distortion, and even unwanted clipping. Adjust that parameter to
your taste, the gain level you will be getting depends on Le Preamp, but also on
your guitar/bass pickups level and the level of other products such as pedals you
may have inserted between your guitar and Le Preamp.
3
Channel A EQ
settings
The Channel A features a passive Bass (low frequency) and Treble (high
frequency) voicing section.
4
Channel A
volume
Determines the output volume of the channel A, the volume is located pre-FX
Loop. This knob is inactive in Fusion mode. In case you hear unwanted clipping,
try lowering the volume too and make sure the following device in your signal
path is not overdriven.
