Persistent Registry
Saving Changes to the Registry
The JETT•RFID internal memory consists of DRAM and Flash. Typically, any changes made to the
JETT•RFID including file creation are temporarily stored in the unit’s DRAM. You must then copy the
files from DRAM to internal flash memory or a removable compact flash card to store the information
permanently.
Consequently, if you do not store the information to flash memory and the unit loses
power, all information stored in DRAM will be lost. However, whenever you make changes that affect
the registry, such and changing settings in the Control Panel or installing software, you can
permanently store registry changes without writing to flash memory by using the Persistent Registry.
Note: The JETT•RFID will also store registry information when you perform a suspend operation.
To store registry information on the JETT•RFID permanently:
1.
From the
Start
menu, select
Programs
and tap
SaveReg
.
2.
The JETT•RFID will begin saving the registry.
After you successfully save the registry, a message box will appear:
3.
Tap
OK
to close the message box.
Resetting the Registry
To reset the Windows CE .NET registry back to the factory default settings:
1.
Turn off the JETT•RFID.
2.
While holding the key in Column 1, Row 1 (upper leftmost) and the key in Column 1, Row 3,
turn on the JETT•RFID. For example:
Operation
3-14
