3.
If you are successful, the screen will display version information, followed by “Invalidating
Persistent Registry,” before it completes the boot up process: For example:
Where x.x.x is the version number
***** JETT.ce
*****
Loader Ver x.x.x
Invalidating Persistent
Registry
Socket
Booting from System
Loading CE image...
#################
Using the Compact Flash Slot
The top of the JETT•RFID has an access panel to a Compact Flash (CF) slot. Through this slot, you can
insert compact flash and device cards.
If you intend to use a device card, it may be necessary to install a driver. If so, make sure the card is
Windows CE .net compatible and you have the necessary drivers. If you are not sure, check with the
card manufacturer before attempting to install the card
Inserting and Removing Cards
To insert a card:
1.
With the front of the display facing you, push the compact flash slot cover (located on top of
the unit) to the left.
Push
2.
The slot cover will automatically pop open.
3.
Insert the compact flash/device card into the slot with the front of the display facing you and
the top of the card pointed to the slot until it clicks and the release lever moves upward.
Release Lever
4.
Close the cover.
5.
For device cards, the JETT•RFID will attempt to recognize the device and display a dialog box.
6.
If it finds a driver for the device, the JETT•RFID will display a dialog box for that device. For
example:
JETT•RFID Technical Reference Manual, MAN0339, Rev. A, Preliminary
3-15
