Toaster User Manual
2.5. Back tray installation: Hanging the back tray to the hook of the back tray following
the arrowhead (picture three).
3. Electricity installation
3.1. Make sure the supplied voltage is coordinated with the using voltage.
3.2. The power wire should be connected the special socket which lead through the
special air switch and the electric leakage protector. Make sure the ground wire
connection is connected well. For convenient operation, ban to pile up the sundry
goods near the switch.
4. Operation
4.1. When the power is on the indicator will light, turn the knob COLOR CONTROL to
right until it reached the position “3”(notice: the speed of the chain net as fast as
the color became lighten. When the gearshift switch was turned to the “BREAD”
position, the up electric heating tube and the down electric heating tube will
heating at the same time, and the inside temperature of the unit will warm up. The
temperature in the middle of the unit can be reached the highest temperature
284
℃
in twelve minutes, if there was no bread inside of the unit. Then the
temperature will stay in 284
℃
.
4.2. Before toasting, turn on the power and approximately 10 to 12 minutes for a
warm-up period. Then try to toast two pieces of bread to see whether the color is
good or not, and adjust the speed of the chain net. If want the color deepen, turn
the color controller to right to go over “3” position. (Notice: the more graduation
and lower chain net speed, the color of the bread will deepen. As the visa.) After
4
