8
14.
If the supply cord is damaged, it should be substituted by the oil-resistant flexible
sheathed cable YZW (No.57 of GB/T 5013.1
（
IEC 60245
，
IDT
）
) or special sets
purchased from the manufacturer or its maintenance department and the
substitution work should be done by the manufacturer, its maintenance
department or similar professional personnel.
5. Using Instructions
1.
Before using, check the correctness of the power supply installation and ensure
that the supply voltage comply with the furnace working voltage.
2.
The working selection switch is printed with the symbol of [
－
＝
]. When the
switch is press down the [
－
] position, only half of the insert slots will work, and
when the switch is pressed down to the [
＝
] position, all the insert slots will work.
3.
When using, the plug shall be connected to the receptacle with same voltage as
rated of the device. Then adjust the working selection switch as you need, put the
bread into the relative slots, and rotate the timer switch clockwise to set the baking
time. When the set time is up, you can hear a buzzer sound, that means the
heating is done, and the bread will be bounced up by press down the bread taking
out switch.
4.
Bread scraps would fall into the crumb tray automatically during the bread heating
period. The leftover shall be disposed of timely to keep the tray clean and healthy.
5.
The bread to be heated should not be smaller than half of the whole piece,
otherwise it would be difficult to take out the bread.
6.
Stop using if it malfunctions during operation.
7.
Do not touch the device body to avoid burnings during cooking.
8.
The device would be still hot for a while after operation, so do not touch any of the
heating elements in the device.
6. Routine Check
It is necessary to check the machine daily.
Check the machine regularly can avoid serious accident happens.
Stop using if user feels that there are some problems in the circuit or machine.
Check the appliance every time before and after using:
Before using: Whether the machine is tilted?
Whether the control panel is damaged?
Whether the power cord is aged, broken or damaged?
During using: whether there is strange smell, odour or vibration noise?
Whether the temperature is out of control or there is electric leakage?
Whether the power is normal?
TWOTHOUSAND.COM
