twotrees TT402DK, Product Manual

Hammock Spring

Hammock Hook

Strong & Secure

6

HOW TO HANG  

YOUR HAMMOCK

We recommend using the Two 

Trees screw eye and hook 

(TT502HH) with the Two Trees 

springs (TT503HS) The spring 

is optional. 
NOTE: It is recommended 

to use structurally sound, 

strong timber posts that are 

10cm square or more. When 

installing always check with a 

qualified builder for safety.
For sturdy masonry walls (not air/hollow/single brick or besser block) a 10mm dyna bolt with a 

large washer and rope can be used.
For detailed installation instructions on (TT503HS) Two Trees Spring, please refer to the  

Two Trees website. 
www.twotreeshammocks.com.au or scan the below QR code.

Read instructions before use and keep for future reference. Failure 

to read these instructions before use can lead to an increased risk 

of injury. When installing always check with a qualified builder for 

safety.

WARNING

:  

DO NOT EXCEED THE MAXIMUM LOAD OF 200KGS

PERMANENT INSTALLATIONS 

TEMPORARY INSTALLATIONS

For Temporary instillations that are portable and do not require a fixed point we recommend 

using the Two Trees stand that was included in your double hammock kit (TT402DK).

Assemble and set up your double 

hammock kit stand according to 

the included instructions that were 

included in your kit.

Attach the hammock onto the hooks at 

either end ensuring the hammock and 

suspension cords are not twisted.

1

2