The IP address and associated network configurations can be changed
by selecting the settings (‘gear’) icon:
DCHP can be set, or a new IP address entered. Include the Gateway
address of the local Router, and the desired Primary and Secondary
DNS server addresses, if different.
New browser sessions will prompt for a Username and Password.
When continuing within the current browser session there will be no
prompt to enter a Username or Password.
Like most ethernet enabled devices, the client web browser may flag
the internet connection as 'Not secure'. This can be ignored, because
hardware devices don't usually serve ‘https’ (secure) pages to clients.
However, general network security is VERY IMPORTANT. It is up to the
user to ensure adequate overall security for the internet connection.
Like all computers, on all networks, the transmitter's network port will
be continually subject to external hack and ‘Ping of Death’ attacks.
Connect the transmitter’s network port to the Internet via a Router
with port forwarding configured in such a way as to ensure maximum
local network security. Schedule regular checks, on an on-going basis,
to ensure that the Router is running the very latest manufacturer’s
firmware.
TX Digicast take no liability whatsoever for damage or losses caused by
a successful network attack.
