41
3.4 Advanced
This section facilitates configuring advanced BIOS options for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security Power Boot Exit
Setup Warning
Setting items on this menu to incorrect values may
cause your system to malfunction.
Item Specific Help
X
Advanced Chipset Control
X
Advanced Processor Options
X
I/O Device Configuration
X
DMI Event Logging
Reset Configuration Data:
Large Disk Access Mode:
Legacy USB Support:
X
Hardware Monitor
X
IPMI
X
Console Redirection
[
No
]
[DOS]
[Enabled]
Select options for
Advanced Chipset
features.
F1
Help
↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
Esc
Exit
←
→
Select Menu
Enter
Select
X
Sub-Menu
F10
Save and Exit
NOTE: When an IPMI card is installed, the Hardware Monitor submenu is disabled
and the IPMI submenu is enabled, and vice versa.
Reset Configuration Data
If you install a new piece of hardware or modify your computer's hardware
configuration, the BIOS will automatically detect the changes and reconfigure the
ESCD (Extended System Configuration Data). Therefore, there is usually no need
to manually force the BIOS to reconfigure the ESCD.
Select [Yes] if you want to clear the ESCD area.
Options: Yes /
No
Large Disk Access Mode
This option determines whether a hard drive with more than 1024 cylinders, more
than 16 heads and or more than 64 tracks per sector is present on the system. Set
this option to
DOS
if such a hard drive is present. Else, set this option to [Other].
Virtually, all modern hard disks have these characters so leave this option at [DOS],
unless you know otherwise.
Options:
DOS
/ Other
Legacy USB Support:
Enables support for legacy USB.
Options:
Enabled
/ Disabled
